netcdf dep0004_icoast00_ime-slcost000_L2_2014-05-17_data_rt {
dimensions:
time = UNLIMITED ; // (22 currently)
depth = 191 ;
variables:
double conductivity(time, depth) ;
conductivity:long_name = "water conductivity" ;
conductivity:standard_name = "sea_water_conductivity" ;
conductivity:units = "S m-1" ;
conductivity:coordinates = "time depth latitude longitude" ;
conductivity:_FillValue = 1.79769313486232e+308 ;
conductivity:sources = "sci_water_cond" ;
conductivity:grid_sources = "conductivity" ;
conductivity:grid_coordinates = "profile_index depth" ;
conductivity:grid_method = "index mean" ;
double density(time, depth) ;
density:long_name = "water density using salinity from raw temperature and raw conductivity" ;
density:standard_name = "sea_water_density" ;
density:units = "Kg m-3" ;
density:coordinates = "time depth latitude longitude" ;
density:_FillValue = 1.79769313486232e+308 ;
density:sources = "salinity temperature pressure" ;
density:method = "sw_dens" ;
density:grid_sources = "density" ;
density:grid_coordinates = "profile_index depth" ;
density:grid_method = "index mean" ;
double depth(depth) ;
depth:long_name = "profile grid depth" ;
depth:standard_name = "depth" ;
depth:units = "m" ;
depth:positive = "down" ;
depth:axis = "Z" ;
depth:_FillValue = 1.79769313486232e+308 ;
depth:sources = "m_depth" ;
depth:filling = "linear" ;
depth:grid_sources = "depth" ;
depth:grid_resolution = 1. ;
depth:grid_min = 2. ;
depth:grid_max = 192. ;
double latitude(time) ;
latitude:long_name = "profile grid latitude" ;
latitude:standard_name = "latitude" ;
latitude:units = "degree_north" ;
latitude:axis = "Y" ;
latitude:coordinates = "time" ;
latitude:_FillValue = 1.79769313486232e+308 ;
latitude:sources = "m_gps_lon m_gps_lat" ;
latitude:conversion = "nmea2deg" ;
latitude:filling = "linear" ;
latitude:grid_sources = "latitude" ;
latitude:grid_coordinates = "profile_index" ;
latitude:grid_method = "mean" ;
double longitude(time) ;
longitude:long_name = "profile grid longitude" ;
longitude:standard_name = "longitude" ;
longitude:axis = "X" ;
longitude:units = "degree_east" ;
longitude:coordinates = "time" ;
longitude:_FillValue = 1.79769313486232e+308 ;
longitude:sources = "m_gps_lon m_gps_lat" ;
longitude:conversion = "nmea2deg" ;
longitude:filling = "linear" ;
longitude:grid_sources = "longitude" ;
longitude:grid_coordinates = "profile_index" ;
longitude:grid_method = "mean" ;
double pressure(time, depth) ;
pressure:long_name = "water pressure" ;
pressure:standard_name = "pressure" ;
pressure:units = "decibar" ;
pressure:coordinates = "time depth latitude longitude" ;
pressure:_FillValue = 1.79769313486232e+308 ;
pressure:sources = "sci_water_pressure m_present_time" ;
pressure:conversion = "bar2dbar" ;
pressure:filter_method = "applySeabirdPressureFilter" ;
pressure:filter_parameters = 4. ;
pressure:grid_sources = "pressure" ;
pressure:grid_coordinates = "profile_index depth" ;
pressure:grid_method = "index mean" ;
double profile_index(time) ;
profile_index:long_name = "profile index" ;
profile_index:units = "1" ;
profile_index:coordinates = "time latitude longitude" ;
profile_index:_FillValue = 1.79769313486232e+308 ;
profile_index:sources = "time depth" ;
profile_index:method = "findProfiles" ;
profile_index:grid_sources = "profile_index" ;
double salinity(time, depth) ;
salinity:long_name = "water salinity" ;
salinity:standard_name = "sea_water_salinity" ;
salinity:units = "PSU" ;
salinity:coordinates = "time depth latitude longitude" ;
salinity:_FillValue = 1.79769313486232e+308 ;
salinity:sources = "conductivity temperature pressure" ;
salinity:method = "sw_salt" ;
salinity:grid_sources = "salinity" ;
salinity:grid_coordinates = "profile_index depth" ;
salinity:grid_method = "index mean" ;
double temperature(time, depth) ;
temperature:long_name = "water temperature" ;
temperature:standard_name = "sea_water_temperature" ;
temperature:units = "Celsius" ;
temperature:coordinates = "time depth latitude longitude" ;
temperature:_FillValue = 1.79769313486232e+308 ;
temperature:sources = "sci_water_temp" ;
temperature:grid_sources = "temperature" ;
temperature:grid_coordinates = "profile_index depth" ;
temperature:grid_method = "index mean" ;
double time(time) ;
time:long_name = "profile grid time" ;
time:standard_name = "time" ;
time:units = "seconds since 1970-01-01 00:00:00 +00:00" ;
time:axis = "T" ;
time:_FillValue = 1.79769313486232e+308 ;
time:sources = "m_present_time" ;
time:grid_sources = "time" ;
// global attributes:
:abstract = "Deployment of shallow Slocum G1 glider icoast00 in fulfillment of the Engineering Trial Mission named BFLY000 (butterfly for trials) prior to the ALBOREX-2014 mission that will follow afterwards. This glider is one of the two gliders deployed in this multi-glider experiment. THIS IS THE SECOND TRY AFTER MISSION ABORT DUE TO JETTISON LOSS \'ON FLIGHT\'. icoast00 has now a new G2 jettison and was re-ballasted in a \'real sea-water\' tank" ;
:acknowledgement = "Ministerio de Economía y Competitividad (http://www.idi.mineco.gob.es/). Govern de les Illes Balears (http://www.caib.es/)." ;
:author = "SOCIB Glider facility" ;
:author_email = "mtorner@socib.es" ;
:cdm_data_type = "Trajectory" ;
:citation = "Balearic Islands Coastal Observing and Forecasting System." ;
:comment = "Instantaneous regularly sampled vertical profiles generated from depth binning of already processed (regularized, corrected and/or derived) glider data." ;
:Conventions = "CF-1.6" ;
:creator = "SOCIB Glider facility" ;
:creator_email = "mtorner@socib.es" ;
:creator_url = "http://www.socib.es/?seccion=observingFacilities&facility=glider" ;
:data_center = "SOCIB Data Center" ;
:data_center_email = "data.centre@socib.es" ;
:data_mode = "real time" ;
:date_modified = "2015-03-09T17:03:50+00:00" ;
:featureType = "trajectoryProfile" ;
:geospatial_lat_max = 39.5309649999999 ;
:geospatial_lat_min = 39.5266383333332 ;
:geospatial_lat_units = "degree_north" ;
:geospatial_lon_max = 2.08272166666667 ;
:geospatial_lon_min = 2.07154 ;
:geospatial_lon_units = "degree_east" ;
:history = "Product generated by the glider toolbox version 1.1.0 (https://github.com/socib/glider_toolbox)." ;
:institution = "SOCIB (Sistema de Observación y predicción Costero de las Islas Baleares)" ;
:institution_references = "http://www.socib.es/" ;
:instrument = "IME-SLCOST000" ;
:instrument_manufacturer = "Webb Research Corp." ;
:instrument_model = "Slocum G1 Shallow" ;
:license = "Approved for public release. Distribution Unlimited." ;
:netcdf_version = "4.0.1" ;
:positioning_system = "GPS and dead reckoning" ;
:principal_investigator = "Prof. Joaquín Tintoré" ;
:principal_investigator_email = "jtintore@socib.es" ;
:processing_level = "L2 interpolated data at selected locations and instants" ;
:project = "CARTEX-2014" ;
:publisher = "SOCIB" ;
:publisher_email = "info@socib.es" ;
:publisher_url = "http://www.socib.es" ;
:source = "glider" ;
:source_files = "icoast00-2014-136-3-0-sbd(01030000)\n",
"icoast00-2014-136-3-2-sbd(01030002)\n",
"icoast00-2014-136-3-4-sbd(01030004)\n",
"icoast00-2014-136-3-0-tbd(01030000)\n",
"icoast00-2014-136-3-2-tbd(01030002)\n",
"icoast00-2014-136-3-4-tbd(01030004)\n",
"" ;
:standard_name_vocabulary = "http://cf-pcmdi.llnl.gov/documents/cf-standard-names/standard-name-table/16/cf-standard-name-table.html" ;
:summary = "Deployment of shallow Slocum G1 glider icoast00 in fulfillment of the Engineering Trial Mission named BFLY000 (butterfly for trials) prior to the ALBOREX-2014 mission that will follow afterwards. This glider is one of the two gliders deployed in this multi-glider experiment. THIS IS THE SECOND TRY AFTER MISSION ABORT DUE TO JETTISON LOSS \'ON FLIGHT\'. icoast00 has now a new G2 jettison and was re-ballasted in a \'real sea-water\' tank" ;
:time_coverage_end = "2014-05-17T15:58:04+00:00" ;
:time_coverage_start = "2014-05-17T10:09:31+00:00" ;
:title = "Glider deployment real time gridded data" ;
:transmission_system = "IRIDIUM" ;
}